UV Curable Polyurethane Dispersion (UV-PUD)
UV-13A | UV-16A | |
---|---|---|
Characteristics | Yellowing type Middle solid content Economical Pass all the requirements of wood coating (GB/T 23999-2009) |
Non-yellowing type Middle solid content Standard type Pass all the requirements of wood coating (GB/T 23999-2009) |
Application | Sealer, Top-coat |
Sealer, Top-coat |
Solid content (%) | 35 | 35 |
Viscosity (cps) | <200 | <200 |
PH Value | 6.5-9.0 | 6.5-9.0 |
Appearance of dispersion | Semi-transparent white | Semi-transparent white |
Content of organic solvent | DMAC=4.7% | 0% |
Photo initiator & dosage | 3 | 3 |
UV irradiation energy (mJ/cm²) | 500-900 | 500-900 |
Pencil hardness on glass | H~2H | 2H |
Glossiness (60°) | 109 | 100 |
Resistance to water (GB/T 23999-2009) |
PASS | PASS |
Resistance to alcohol (GB/T 23999-2009) |
PASS | PASS |
Resistance to hot water (GB/T 23999-2009) |
PASS | PASS |
Resistance to acid (GB/T 23999-2009) |
PASS | PASS |
Resistance to alkali (GB/T 23999-2009) |
PASS | PASS |
Anti-stain (GB/T 23999-2009) |
PASS | PASS |
Anti-blocking (GB/T 23999-2009) |
PASS | PASS |
Storage Time | 6 months | 6 months |
UV-77A | |
---|---|
Characteristics | High C/P value Very easy to wash-out Good adhesion Highlight wood graining Resistant to oil migration |
Application | Adhesive primer & wood stain for furniture |
Solid content (%) | 35 |
Viscosity (cps) | 50 ±20 |
PH Value | 6.0-8.5 |
Appearance of dispersion | Semi-transparent white |
Content of organic solvent | DMAC = 4.5% |
Viscosity after 30% dye added (cps) | < 100 |
Viscosity after 30% dye & 3% photo initiator added (cps) | < 200 |
Stability after 30% dye & 3% photo initiator added (hr) | > 72 |
Touch feeling before UV curing | Tacky |
Photo initiator & dosage | 1 |
UV irradiation energy (mJ/cm²) | 100 |
Pencil hardness on glass | 3B |
Glossiness (60°) | --- |
MEK rub(cycle) | >50 |
Alcohol rub(cycle) | >50 |
Toluene rub(cycle) | >100 |
Storage Time | 6 months |